Do You Need A Professional To Install A Fibreglass Pool?

Many people assume that since fibreglass pools are pre-manufactured in industries and transported to sites for installation, they’re easy to install and can be done by an individual directly. This however, isn’t true – at least if you want to experience long-lasting results and enjoy the benefits of fibreglass pools.


Fibreglass – A Popular Choice For Pools

Such pools are a popular choice because:

• They can be installed easily

• They don’t require a lot of maintenance

• They’re long lasting

• They have high durability

• They’re available in several shapes and sizes

• They’re more environmentally friendly than other pools

• They’re customisable

• pH level of your pool won’t be affected by fibreglass

• It’s easy to increase their attractive value

• They’re cost effective

• They’re smooth on the skin and feet

Should A Professional Install Your Fibreglass Pool?

It may seem like the only process involved in fibreglass pool installation is digging a hole in the ground and inserting the fibreglass shell, but there’s a lot more to it than that. While your individual efforts at pool installation may be commendable, they’re no match for what a professional can do for you.

Pool installation is a big investment, and you don’t want to go wrong with it. You should leave the task of pool installation to the professionals. The following considerations will show you why:

Pool Installation Process

It’s necessary that your pool is plumbed correctly, drained, and installed. This requires the bedding material under the shell floor of the pool to be free-drained. Minimisation of system pressures is done through appropriate filtration plumbing. Compacting and filling cement stabilised backfill around steps and walls of the swimming pool is the next step in the process. Sub-soil is drained around the perimeter of the pool and there’s stand pipe system compliance. A bond beam must also be installed so that the pool doesn’t rise up. Safety standards must be complied with and a professional will make this process easier for you.

Warranty Coverage

Wouldn’t you like to know you’re protected in case something goes wrong with your pool installation? That’s not going to happen if you install your fibreglass pool yourself. In such cases, you have to stand behind your work and at the most, get a manufacturer’s warranty if the defect is with the pool shell. With a professional, this isn’t the case. You’ll be given warranty coverage from the professional installer as well which can protect you in case of issues that arise with pool installation. You’ll also be more relieved knowing that the installation has been done by a professional.

Continued Support

Professional pool installers with provide you with continued support even after the pool has been installed. If there’s an issue with using a pool over its lifespan, all you have to do is get in touch with the professional and they’ll help you out. If you decide to install the fibreglass pool on your own though, you won’t receive any follow-up support beyond the point of purchase from the manufacturer of the fibreglass shell.

Abilities, Equipment & Knowledge needed

Pool installation is a process requiring certain skills, knowledge, and engineering experience, particularly when it concerns electrical work, concrete laying, excavation, ground preparation, and plumbing. While you may not have the qualification to perform such work yourself, a professional certainly will. Using the right equipment, a professional can get the job done effectively. They can also respond to problems quickly and pursue courses of action to solve them. You may experience several hurdles that you can’t resolve while trying to install the pool yourself, but a professional will be able to spot what’s wrong and fix it so that the pool is installed correctly.



You may feel like you’re saving a lot by installing your own fibreglass pool but the truth is, having a professional do it for you will actually turn out to be a lot more cost-effective in the long run. If you make a mistake while trying to install the pool, it could result in high ground water pressure or excessive loading that will involve costly repairs.

Professionals Will Make It Easier For You

There are many aspects of fibreglass pool installation that may be difficult for you to deal with as an individual, but a professional will be able to make the whole process of pool installation easier for you.

Getting The Permits And Meeting Building Codes

You’ll need to figure out exactly what permits are needed to install a fibreglass pool and how you can apply for them. This can take up a lot of your time. Professionals don’t face this issue. They already know the process involved and can get the correct building permits for you.

It’s very important to follow building regulations and codes when you’re installing a fibreglass pool. If you don’t, you’ll be charged heavy fines for it and may even have to abandon the project entirely. A professional will be up to date with the latest requirements and building codes and make the process easier for you. You won’t have to deal with the stress of whether or not you’re violating any regulations.

Coordinated Delivery

A professional will be able to coordinate the delivery of the fibreglass shell. A flatbed truck is used to transport the shell and this is then moved into the excavated region with the use of a crane.

Thorough Inspection

With a professional, you’ll know that the installation of the pool has been carefully inspected throughout the process as well as before handing over the final product.

Managing Time And People

A professional will have to manage all the people involved in the task of pool installation and ensure that it is completed in a timely manner. Site prepping, pool laying, and finishing touches needed are done within specified deadlines.

Paying Attention To Detail

A professional will ensure you get the most from your pool installation. Details such as pump installation, lighting, filtration system, and accessories will make your pool more enjoyable and add to the beauty of your backyard. Given all the benefits that a professional offers when it comes to installing a fibreglass pool, it only makes sense to hire one and save yourself the trouble of pool installation.

Top 10 Pool Buying Tips

Having a swimming pool in the backyard can completely overhaul your lifestyle, providing you with countless hours of fun in the sun however, we understand that it is a big decision that requires careful consideration. With that in mind, we’ve put together our top 10 ten buying tips to help you select a pool that will suit your budget, home, and swimming requirements.


1. Work out your budget

Before deciding on the style, design, and layout you want, the very first thing you should consider is your budget. Once you have established how much you can spend, you can select from the options available within your price range. Your pool builder will work with you to determine which style and design will work best in your backyard. There are many things that can contribute to overall cost of your pool such as lighting, cleaners, and accessories. When doing your research, ask how much it is for the pool you want plus any added extras.

2. Decide what your pool will be used for the most

Determining what your pool will be used for the most is an integral part of choosing the right pool. The intended purpose of your pool will influence the size, shape, and style that it will be. There are a few types of pools on the market that have been designed with different purposes in mind. For example, if you want a pool to use for relaxation, a plunge or swim spa might a good choice. If fitness is your motivation for purchasing a pool, a lap pool may be suited to you.

3. Location

To cut down costs, it may be tempting to choose a spot in your backyard that is the cheapest to install, however you should ask yourself if that is going to be the best place for your pool long term. If the location you have chosen is shady and surrounded by trees, it could end up costing you more in heating and cleaning in the long run. How much sun your pool gets throughout the day will affect how warm your pool water is. If you have heating for your pool, the cooler the water is, the more it will cost to get it to a bearable temperature. Its always a good idea to choose an area in your backyard that doesn’t have trees surrounding it, if leaves constantly fall into the pool, you will have to get them out regularly to prevent them from disrupting your equipment and chemical levels.

Some other things that you should consider when choosing the location of your pool:

• How you want your pool to look from inside your home

• Whether your pool will be highly exposed to wind

• Can you use an existing fence line as a part of your pool fencing to reduce costs?

• Ensure there are no pipes or cables in the ground where you want your pool to go. You can do this by getting a sitemap.

4. Ongoing costs

Some make the mistake of not factoring in the ongoing expenses involved with owning a swimming pool. Concrete pools for example need to be resurfaced every 10 to 15 years which costs an average of $10,000. Other types such as vinyl liner pools, require vinyl liner replacements every 5 to 10 years and they cost approximately $4,000. Fibreglass pools do not require resurfacing or replacing over the lifetime of the pool, making them a popular choice.

Some additional things to look for when deciding which type of swimming pool to choose:

• Which type uses the least chemicals?

• How much does it cost to run?

• Requires the least upkeep?

5. Factor in additional extras

When conducting your research, it is important to factor in additional extras that may not be included in your quote. Fencing, landscaping, paving, heating, and lighting are features that you can include in your pool area for an extra cost. If there are extras you would like for your pool, ask for them to be included in your quote. Some features such as self-cleaning pool systems cannot be added at later date. Ask you pool builder what options are available for your pool and decide which ones you do and don’t want.

6. The time of year you install your pool

When deciding on the time of year to install your pool, it may be tempting to wait until the summer season approaches, however this is peak season in the pool industry and it my be harder to get your pool installed exactly when you want it to be. In winter, pool companies are far less busy and generally offer added extras or discounts at this time, which can save you money. By having your pool installed in winter, it will be ready to go come summertime.

7. The look you are trying to create

Before purchasing your pool, you should think of the overall look you want to create for your backyard and how much space you are willing to sacrifice for your pool. If you want to transform your backyard into a tropical oasis, kidney shaped pools have soft, round edges and are ideal for complementing this style. If you are wanting something ultra-modern, rectangular shaped pools are contemporary and timeless.

8. Type of pool

Choosing the right type of pool can save you a substantial amount of time and money over its lifespan.

There are 3 main types of swimming pools here in Australia. They include:

• Vinyl liner pools

• Concrete pools

• Fibreglass pools

Vinyl liner pools are the cheapest initially to install, although the interior vinyl liner is susceptible to tears and punctures which is costly to replace.

Concrete pools offer flexibility when it comes to the depth of your pool and the style, however they are highly porous making the prone to algae and bacteria infestations. They are the most expensive to install and maintain.

Fibreglass pools cost more initially to install than vinyl liner pools, but they don’t need to be replaced or resurfaced over their lifetime. They interior surface is virtually nonporous making it algae and bacteria resistant. Fibreglass pools are the least time consuming and most cost-effective option on the market today.

9. Ensure your pool has extensive warranties

This is an important one. When buying a pool, make sure that it comes with a generous warranty. Many reputable pool companies offer lifetime warranties on their pool and their construction. This allows you to have peace of mind knowing that your pool is covered if anything unforeseen happens to your pool.

10. Qualified builder

Another vitally important tip. Ensure that you are using a licenced and insured pool builder that has extensive experience in the pool industry. Have a look at their work, customer references and reviews for feedback. If you chose to hire someone that is not qualified to cut down on costs, you should be aware of the major safety risks involved.

A swimming pool is a big purchase and you want to be sure that your hard-earned money is being invested in a superior quality pool. Our team here at Barrier Reef Pools are leaders in the pool industry and with over 30 years’ experience manufacturing and installing superior quality fibreglass pools, we are confident we can help you find the pool of your dreams. Call us today to organise your free onsite quote.

Can a Plunge Pool Be Heated?

If you’ve decided a plunge pool is the perfect fit for your home and lifestyle you may be wondering if they are suitable for heating? The great thing about plunge pools is they are compact in size which means they heat effectively and economically. Here’s everything you need to know about heating for your plunge pool.


Why should I consider heating for my plunge pool?

Heating allows you to enjoy your pool throughout the year not just when the weather is warm. Plunge pools are designed for comfort and relaxation which makes heating the perfect accompaniment. Warm water is known to have many benefits on the body including soothing tired, achy muscles as well as pain associated with injuries.

Which heating type is best for my plunge pool?

Not all heating solutions work the same, so before purchasing one for your plunge pool here are some things to consider to ensure it suits your heating requirements:

The climate in your area

Some may think that people who reside in cooler parts of the country are the only ones who can benefit from have a heating solution for their pool however, this is not the case. Even in climates where the weather is warm for much of the year, once winter sets in, the water can be unbearably cold. In most cases the pool will more than likely not be used during this time. Installing heating means you can use your pool whenever you like, even in winter. As plunge pools are primarily made for relaxation rather than swimming laps, you will need to heat the water to be able to enjoy it comfortably when the weather cools down. To give you an idea, a spa is normally heated to around 36 degrees and this a pleasant temperature to sit in for most. One of the many advantages to fibreglass pools is they naturally insulate heat and retain it for longer too.

Establish what your plunge pool will be used for the most

How you use your pool and often you’d like to use it can help you decide which heating solution is best for your plunge pool. For example, if you want the have the option to heat your pool on short notice you may be benefit from a system that heats quickly such a gas. Alternatively, if you want to use your pool primarily for swimming in rather than relaxing, a solar blanket may be better suited to you.

Plunge pool heating options

Here are the heating solutions available for fibreglass plunge pools:

Solar Heating System

Solar heating is an extremely popular heating option as they are energy efficient and cost effective to run. Rather than using electricity, they harness energy from the sun to heat your pool water. Solar heating systems are eco friendly and can save you a substantial amount on running costs in comparison to other heating options.

How do they work?

A solar pump runs the solar heating system and it does this by utilising the smallest amount of electricity. Water from your pool is pushed up through a series of capillary tubes located on your roof, it passes through them getting heated along the way, the warm water is then sent back to your pool. This process maintains an even temperature in your pool. Whilst solar is a favoured heating option it does have its downfalls. They are known to not be as effective when there is a lot of cloud or minimal sun which can be an inconvenience when you want to use your pool and it hasn’t heated enough to do so.


Electric Heating System

Electric heating systems are also a popular pool heating option. Whilst they aren’t as cost effective to run as solar, they aren’t overly expensive. The good thing about electric heating systems is that they heat up quickly and more effectively than solar although they are not as environmentally friendly, and they are more expensive.

How do they work?

Electric heating systems work by extracting heat from the air to warm your pool. It does this via a heat exchanger. They are usually more dependable than solar as they don’t rely purely on the sun to work. They can also collect heat at night time too.

Gas Heating System

Gas is known to be expensive, but it typically works the best of all the heating systems as it doesn’t need heat from the sun or air to work. The biggest advantage to a gas heating system is that you can warm your pool to a temperature that suits anytime you want to use your pool quickly. The downside to a gas system is that it they are big energy consumers and aren’t great for the environment. Many pool owners choose to have a solar system as their main heating option and have gas as a backup for when the weather isn’t ideal, and they still want to warm their pool.

How do they work?

They work by burning gas in a combustion chamber. Inside the combustion chamber is a series of copper coils that the pool water runs through and heats. Once it is heated it is then returned to the pool.

Solar pool cover

Solar pool covers are the cheapest heating option however, they aren’t as effective and your water will not be as warm as what it would be if you had a different heating system in place. To get the best heating results for your plunge pool, a solar cover is best used in conjunction with a heating system. The cover will reduce heat loss and retain the heat in your pool for longer.

How do they work?

They have a series small bubbles on the surface that work much like magnifying glasses to intensify the heat going into your pool. They heat the water by letting more of the sun’s rays enter the water and trapping it.

Deciding on a heating system

Choosing the right heating system depends on your preferences and how much you are willing to spend on heating your pool. Remember to consider:

• The climate where you live

• Whether you are happy to only use your pool when the weather is warm enough to do so

• How often you want to use your pool

• The amount of sun your pool gets during the day

• If you want to use your pool primarily for relaxation or swimming

If you have infants or elderly people using your pool, you can benefit from having heating installed. Typically, people within these age brackets do not tolerate being in cold water for extended periods of time. This is mainly due to them not being as active when in the water.

Heating is an ideal solution for those recovering from an injury and want to use their pool for hydrotherapy purposes. Warm water can help to relieve joint and muscle pain as well as promote movement. Our team here at Barrier Reef Pools are experts in the pool industry and have extensive knowledge in all facets of pool inclusions, heating included. If you would like more information regarding heating for your plunge pool, give our friendly team a call today.

Is My Backyard Suited For A Swimming Pool?

When considering a pool for your place, one of the first things you might consider is whether your backyard is suitable for a pool. In an ideal world everyone would have a flat, easy to access area to install a pool in, however, we understand that all backyards are different in terms of their size, access, layout and soil quality. Barrier Reef Pools can accommodate nearly all backyards with a pool that will fit seamlessly into the space that you have.


There are a few variables that may affect your ability to own a pool or make it more difficult to install

Size of your backyard

Love the idea of a swimming pool but not sure if you have the room to accommodate one? Well, there are few things to consider. How big do you want your pool to be? Do you want the pool to take up the majority of your backyard or would you rather have a smaller pool and still have a grass area? If you have a large backyard, your choices are endless, and you are only limited by your imagination. The smaller your backyard is, the more limited you become with the size you can have. If you have a small backyard or courtyard, you might not be able to have a huge pool, however this does not mean you cannot have a luxury pool in your backyard. We have a wide variety of pools suited to every backyard. Our smallest pool is our Billabong Slimline Plunge they are 4.2m x 1.6m. We also have a range of spas if you are looking for something even smaller!

When installing a pool with limited space it’s a good idea to position the pool close to the house or fence, this will amplify the space that you have. By positioning the pool to run parallel along the longest part of your fence can create an illusion of more space.

The slope or layout of your yard

The good news is having a sloping block doesn’t mean you can’t have a pool installed at your place. All of our fibreglass pool range can be installed not only in ground but above ground or partially in ground too. State of the art technology allows us to design our fibreglass pools to fit in practically any yard. A pool that is installed on a sloping block can be quite an attractive feature to your home. A deck or patio is typically installed around the pool which can really bring the outdoor entertainment area and swimming pool together.

It is always best when installing a fibreglass pool to avoid the steepest part of the yard, this will save money and time on excavation. The most important factor to consider is drainage. Drainage is important for all pools and even more so for one in a yard with a slope. If it rains and there is excess water or a leak, it may erode the slope that the pool is installed on. Drainage must be installed and directed away from the house to avoid water flowing towards it. The cost of installing a fibreglass pool on a sloping block will vary depending on access, the steepness of the block and the quality of the soil.

Access to your backyard

You’ll be glad to know that almost anything is possible when it comes to accessing your backyard to put a pool in. Flat blocks with easy access are obviously ideal, this will reduce the time spent installing your pool and the costs involved, however, we know this isn’t the case for many of our customers.
So, what do we consider great access? Enough room to drive a car to where you want your pool to be. Installing the pool before starting construction of the house or properties with land are generally very easy and quick to install.
There is no need to worry if you don’t have great access or it is limited, our experienced team will find a solution to installing your pool, it may just take more equipment and time to get it in. If your house is already established or you have limited access, we will often use a crane to lift your pool in. This is generally a simple process that involves lifting the pool over your house and into your backyard.

If we can’t get anywhere near to where the pool is to be installed, we will have to use a very large crane to lift it in, this can be quite costly, however it is rare that we need to do this.

It’s hard to know if there’s rock in your backyard without digging it up, some owners might have an idea if they have done some construction or landscaping prior. Rock really isn’t an issue if we have adequate access to get a large sized excavator in your backyard, however if we can only get a small excavator in, it is going to take longer to dig. Every pool install requires excavation to some degree, with our above-ground pools being an exception. Having good access to your backyard, in short, means less time and money spent. We have been installing pools for over 30 years, there’s not much we haven’t seen in terms of access. Almost all of the homes we have been to that have limited access, we have found an adequate solution to.


The position your pool will be in

Installing your pool in a north facing position with ample sunlight is desirable as the sun will warm your pool up by approximately 4 degrees, if you have a relatively small backyard, this may not be an option.

Council regulations & utilities

Before starting the process of installing a pool, it is a good idea to check with your local council to see if there are any zoning, safety or local building regulations that you need to comply with first.
When installing your pool its best to avoid placing it over sewers, storm drains, power, and gas pipes. This can be quite costly if any repairs need to be made. Your local council can provide information regarding their location.

Where your pool equipment will go

Lastly, you will need to factor in where your pool pump and equipment will go and if you have the space, it should be placed near the pool on the same level to reduce unnecessary pressure on the pump. Ultimately, there are many factors that determine whether a swimming pool is suitable for your backyard.

Use a licensed pool builder that is experienced in installing pools in atypical backyards

If your backyard is extremely steep, the ground is full of rock, or the ability to access your yard is difficult, this may add to the cost and time it will take to install your pool. Of course we recommend working with a highly experienced pool builder that is confident in installing pools on more challenging blocks, that way you can be confident knowing they going to get it right the first time and provide you with the best design suited to the space you have to work with.

Over the years we have installed thousands of pools in an array of backyards. We believe we can transform your backyard no matter the layout or size. Our experienced team can advise you on the factors you should consider and the options you can choose from based on the size of your backyard. If you have any questions regarding the suitability of a fibreglass pool for your home, call our friendly team today.

Benefits Of A Plunge Pool

Australian backyards are now smaller than ever and as a result, plunge pools have become an increasingly popular choice among homeowners. Plunge pools allow people with small backyards to have a luxury pool for their home. We have put together this article to share everything you need to know about plunge pools to help you decide if they are the right choice for you and your family.


What is a plunge pool?

Before we go through the benefits, we should define what a plunge pool is exactly. A plunge pool is smaller sized pool that has been designed with rest and relaxation purposes in mind. It offers similar benefits to those that come with a larger pool; however, it is more compact in size. Plunge pools are generally around 2 to 7 metres long by 2 to 4 metres wide. Unlike other styles of pools, plunge pools have a large distinctive seating area around a certain area of the pool. This provides a perfect place to sit, relax and unwind after a long day’s work.

A plunge pools depth can vary depending on which type of pool you choose, although you can expect the seating area to be substantially shallower than the centre of the pool. They are more suited to those that want a pool to relax in, do stretches and for physiotherapy purposes rather than serious swimming. They work well in backyards that have limited space or for those who only want to dedicate a small portion of their backyard to a pool. Fibreglass pools come in a variety of shapes, styles, and designs.

Features of a plunge pool


Most of us don’t find sitting in cold water on a cool day an enjoyable pastime. Installing a heating system for your plunge pool means you can enjoy it all year long. Warm water enhances the relaxation experience and it is known to reduce muscle tension and alleviate pain associated with injuries.

Water jets

To accentuate the relaxation experience even further, you can add water spa jets to your plunge pool. Jets in conjunction with warm water, massage tired sore muscles which can help to relax and unwind. Additionally, if you wanted to use your plunge pool for fitness purposes, you can add swim jets. They are high powered jets that propel water in one direction, this allows you to swim against the resistance, giving you a killer workout.


If you were wanting to use your plunge pool in the afternoon/night time, lighting is a great way to enhance the aesthetics of your pool as well as making it safe to use when it gets dark.

Benefits of a plunge pool

Plunge pools are a popular choice for those wanting a pool for their backyard but don’t have enough space for a large one. Plunge pools still offer many benefits that family pools do, they are just a fraction of the size. They are especially great for those living in built up residential areas where space is limited and for people with young children who are gaining confidence in the water. A plunge pool is a great way to create a beautiful focal point in your backyard without requiring a lot of room.

As plunge pools are smaller in size, they require less chemicals and effort to keep them clean. This frees up more time for you to enjoy your pool rather than cleaning it. Plunge pools are far more environmentally friendly than their larger counterparts. They require less water, use less electricity to run and are far more energy efficient to heat. If reducing your environmental footprint is something you are conscious of, a plunge pool could be the solution for you.

Possibly the biggest benefit to owing a plunge pool is the overall health and well being benefits that they can offer. Having a plunge pool in the backyard provides a place to distress, recover, and rest. By reducing your stress levels, you can significantly improve your physical and mental well being.

How do you install a plunge pool?

When starting your pool journey one of the first things to consider is if you want it to be above ground, partially above ground or inground. A plunge pool can be put in via any of these installation methods. Which one you choose is highly dependent on your budget, the look you are trying to create, and which is suited best to the condition of your site. Typically, in ground installations are the most popular type of pool build. An inground plunge pool installation involves excavating the ground, placing the fibreglass shell in, and adjusting it to ensure it is level. Back fill is then placed around the pool and compacted.

A partially above ground installation is similar to that of an inground install, the difference is that the ground is only partially excavated. As the name suggests, above ground pools are positioned above ground, very little groundwork is required however, they tend to look less appealing if they are placed in backyard with nothing around them. When they are built to tie in with existing decking, landscaping, or level with the home they can be a stunning statement piece. They way you choose to have your pool installed does not affect the strength of the shell. High quality fibreglass pools are designed to have extreme tactile strength and will not bulge or crack under the pressure of water or earth movements. A support structure may be built around the pool to give it added stability in some cases.

What is the cost of a plunge pool?

There are many factors that can contribute to the overall cost of a plunge pool. These include, access to your site, the quality of the shell you have chosen, whether you want it installed inground, partially above ground or inground, the surrounds that you choose for your pool and any added extras. The average cost of an inground plunge pool starts at around $13,000. This may seem expensive for a smaller sized pool; however, the quality of a plunge pool is the same as a large pool and it is installed to the same superior standard. We believe that a well-designed plunge pool is an asset to any home. To get an accurate price, it’s best to contact a qualified pool builder, most reputable companies offer free onsite quotes.

Why should I choose a plunge pool?

A plunge pool is a good choice if you:

• Are limited on space but still want a luxury pool for your home

• Want to improve your health and well being

• Want an environmentally friendly pool

• Want to dedicate minimal time to cleaning and maintenance

• Want heating for your pool for the least cost

• Want to save money on power and chemicals

Here at Barrier Reef Pools we construct and install fibreglass plunge pools. Our plunge pools are modern, stylish, and perfect for those wanting to enhance their lifestyle and their backyard. They are a great option for those with limited space but still want the benefit of a pool at their home. We have an extensive range of pools in various colours, shapes and designs and our friendly team would be more than happy to discuss your options with you. Please, feel free to give us a call today.

Quality Fibreglass Pools Built by Barrier Reef Pools

If you’re ready to take the leap and purchase a pool for your home the next important thing to do is consider who you will get to build it. With so many pool company options out there how do you know you are making the right choice? It’s important to find a pool builder that has many years’ experience and will work with you throughout the entire pool construction process to ensure that they build the pool of your dreams to the highest possible standard. Have a look at the companies reviews, this will give you a good indication of whether they are a reputable company or not. Here is what you can expect when installing a pool with Barrier Reef Pools.


Superior workmanship and customer service

Barrier Reef Pools have been manufacturing, installing, and fitting fibreglass pools across the nation for the past 30 years. In that time we have had the privilege of transforming thousands of Australian backyards with our stunning fibreglass pools. We believe that the success of our business both nationally and internationally is highly attributed to our customer centred approach and our ability to produce pools that are structurally unrivalled. It is, and always has been, our priority to not only to deliver an award-winning quality pool for each of our clients but to ensure that we provide exceptional customer service. We have an extensive team of local pool builders throughout Australia that are all highly qualified and licenced. We also export our fibreglass pools worldwide. Over the years our company has expanded, and we are now the biggest manufacturer of quality fibreglass swimming pools in the country. All of our pools are built to the highest safety standards and are in line with building codes. When sourcing a Barrier Reef Pools pool builder within your local area, they will be familiar with the council permits and requirements specific to your town and will organise all of the necessary paperwork on your behalf. You can sit back and relax whilst our team takes care of everything for you. Pool are our passion and we install thousands every year so you can be sure you are working with expert pool professionals.

Proud member of SPASA

Barrier Reef Pools are committed to the highest standard of workmanship and ethics which has proudly earnt us a membership with SPASA (Swimming Pool and Spa Association of Australia). SPASA recognises professional trades that offer exceptional products to the community that improve overall health and wellness.

We build the pools and install them

Barrier Reef Pools are leaders in pool engineering. We manufacture our own pool shells by hand in our state-of-the-art climate-controlled manufacturing plant in Beaudesert, Queensland where no expense has been spared. We build our pools using the most superior quality fibreglass available. All of the facilities within our complex have ERA and EPA licences which are constantly monitored and regulated by local authorities. As we make our own pools, rather than purchasing them from somewhere else, we are confident of their durability, strength, and quality. There is no middle man with us, we make and install our pools which ensures you are getting the best price and you do not have to worry about manufacturing defects or problems. On occasion when contractors use other companies’ pools for their builds, they may not be aware of all of the benefits or downfalls that come with the pool as they are two separate entities.

We believe that installing a pool should be an exciting time not one that is filled with stress and hassle. The last thing you want is to invest a substantial amount of money into a pool and not be happy with the builder or worse, the finished result. Our job here at Barrier Reef Pools is to ensure that you are heard and listened to throughout the entire construction process to meet your specific pool needs. We work with you from the initial meeting to the end of construction. Our highly skilled team can offer helpful advice on the best way to install your pool to get optimal results both aesthetically and functionally. As we manufacture our pools ourselves, we are able to develop innovative features and a superior gel coat finishes and include them in our pools which gives you the highest quality pool that money can buy. We are committed to continually developing our pool series to be able to offer our clients a pool that is highly appealing, safe, and easy and cost effective to maintain. When the day arrives, and it’s time to install your pool, our pool builders will adhere to strict protocols to install your pool safely and will comply with all necessary engineering specifications.


Our pools are second to none

We are devoted to producing the highest standard of fibreglass pools. We only use the finest materials and we are continually implementing the latest innovation into our manufacturing process to bring you the very best in fibreglass pools. We believe we have set a high standard within the fibreglass pool industry and we are proud to offer our clients such a superior product. We are one of only two fibreglass manufacturing companies in Australia that have been awarded the 5 Tick Certified Product Certification by SAI Global. Our pools exceed national and worldwide standards for thickness. Our superior quality pools and luxury designs have seen us receive 121 awards from SPASA. Barrier Reef Pools implement a vigorous 8 stage quality control process to ensure that each swimming pool is constructed to the highest quality standard before leaving our factory. Our entire range is built with 7 superior layers of fade resistant and anti- microbial construction. The first layer consists of an advanced colour technology gel coat, this is what gives your pool its colour. Next is an anti-corrosion barrier, followed by a chemical resistant layer, a layer of Kevlar, a structural layer, reinforcement layer and finally an outer sealer coat.

Customer satisfaction is key

When installing a pool with Barrier Reef Pools you can depend on us to listen to you and respect your pool visions to bring your pool dreams to reality. Our expert pool builders will work with you to create a personalised swimming pool solution that is tailored perfectly to suit your home and lifestyle needs. Being up front and honest is an integral part of our business, every facet of your pool build will be inspected by us and approved by you to ensure you are entirely happy with the end result.

We understand that purchasing a pool is a big commitment that requires careful consideration. This is why we work hard to ensure that our pools are built to exceed world-wide standards and we will continuously strive to be leaders in the pool industry. Our customers’ satisfaction in their new pool is the utmost consideration and we are dedicated to transforming backyards with a pool that surpasses our clients expectations. We know how much joy a swimming pool can bring, and we would love to be a part of creating something special for your home. If you would like to discuss a Barrier Reef Pools fibreglass pool for your home, get in touch with our friendly team to organise your free onsite quote.

Slimline Pools - Everything You Need To Know

Choosing the perfect pool for your home and family can be tricky. With so many options on the market you might not know where to start. If you are looking to create a beautiful statement piece in your backyard that does not sacrifice a lot of space, a slimline pool might be the perfect choice. To help you make the right decision, here’s everything you need to know about slimline pools.


What is a Slimline Pool?

The name may give you clue to the shape of the pool. Slimline pools have been specifically designed to offer many of the popular features that family pools do; they are just slimmer in size. They are a great swimming pool option for those looking something a bit bigger than a lap or plunge pool yet smaller than a regular pool. They’re typically long in length and shorter in width. Slimline pools boast many uses from swimming laps and fitness to relaxing and entertaining. They have plenty of room for multiple people to swim freely. A quality fibreglass slimline pool will come with added safety features such as varying depths, safety steps and edges and non slip surfaces. This ensures that the children using your pool can do so safely. They are ideal option for those with limited space or a narrow area in the backyard to work with but would still like to have a pool for their home. Additionally, as they are not as big as a family pool, they are more efficient to heat and to keep clean.

What size can a Slimline Pool be?

Slimline pools come in a huge selection of lengths and widths with an option to suit every requirement. They normally start at around 4.2 metres wide and up to 10.5 metres long and are narrow and rectangular in shape. Our slimline collection here at Barrier Reef Pools comprises ten different lengths and widths and all have an 100mm wide safety ledge around the proximity of the pool. They have enough room to comfortably swim, relax and perform laps in.

How do you make a Slimline Pool?

Fibreglass slimline pools are constructed on a mould in a factory. They are designed to have extreme tactile strength and durability. Once you have chosen the slimline pool you would like and your pool builder has got all the necessary approvals, it’s just a matter of getting it delivered and installed.

Can I customise a Slimline Pool?

You cannot alter the shape of a fibreglass slimline pool but there are many innovative inclusions you can add to your slimline pool to enhance your swimming experience. Some popular choices include:


Slimline pools are economical to heat which is great for those who want to use their pool year-round and for relaxation purposes. Warm water is known to alleviate pain associated with injury and muscle tension.

Mood lighting

Lighting for your pool can not only enhance the overall aesthetics but it also makes it safer and more functional to use at night.

Spa jets

Adding spa jets to your slimline pool can take the relaxation to the next level. They can be used to massage aches and pains as well as used for resistance to swim laps against.

Incorporate a spa design

Spa designs compliment slimline pools well. They are positioned at the end of the pool and can have an overflow opening. This enables water to cascade into the pool which doubles as a beautiful design feature. Alternatively, you can have the water overflow into a feature or artificial stream.

How long does it take to install a Slimline Pool?

Installing a fibreglass slimline pool is generally quick and easy. If your site is flat and you don’t have restricted access to your property, your pool can be built in a matter of a week. Although you should know unforeseeable factors such as the time of year it is, weather conditions and delays in council approvals can prolong your pool installation.

How much is a Slimline Pool?

This is a question we get asked often here at Barrier Reef Pools. How much a pool costs is understandably a big consideration however, there are so many things that can affect the price of your pool. Additional extras such as lighting, landscaping, fencing and the condition of your backyard can all contribute to the price of your pool. To give you a rough idea, the starting price for a professionally installed slimline pool is around $25,000. The best way to get an exact price for the pool you want for your place, is by contacting your local pool builder. Many reputable pool companies offer obligation free onsite quotes.

Benefits of a Slimline Pool

It’s no secret that swimming can provide many benefits to one’s general health and wellbeing. Here are some of the benefits that a slimline pool can provide:

• Contemporary and stylish – Their simple and square design compliments any outdoor setting to make a beautiful focal point in the backyard.

• Plenty of room for the family – They offer much of the same lifestyle benefits that a larger pool does, they are just more modestly sized.

• Limited space – A great swimming pool option for those who are limited on space or have a narrow area of yard.

• Keep fit – Swimming offers an array of benefits. Slimline pools have enough room to swim laps in freely.

• Heat effectively – As they are smaller than a larger pool they heat more effectively. This not only saves you money but is better for the environment too.

• Generous seating – Slimline pools have large seating across one end and halfway along on side. This makes an ideal spot to sit and catch up whilst enjoying the pool on a sunny day.

Why should I choose a Slimline Pool?

Slimline pools are modern and are sure to compliment the layout of any backyard. They are a great pool choice for those with limited space who love the idea of having a swimming pool in the backyard. They offer the best of both worlds as they heat better, use fewer chemicals and are easier to clean than larger pools whilst still providing enough room for the family to swim and play without restrictions. As they are narrow in shape and have ample seating around the perimeter, they make the perfect place for young children to learn to swim and gain confidence in the water. They don’t have limitations on their use and can be used for relaxation, fitness, and everything in between.

A well-designed slimline pool can not only provide you with many years of fond memories with those you care about most, but they can also add valuable dollars to your property. Most of us love the idea of having a swimming pool in the backyard. They provide a place to relax, unwind and keep active right in the comfort of your own home.

If a slimline pool is something you are considering for your place, our highly skilled team here at Barrier Reef Pools can help. We manufacture and install award winning fibreglass pools throughout Australia. If you have any questions regarding our slimline range or would like additional information, give us a call, we are happy to help.

Lap pools – Everything you need to know

Lap pools have become increasingly popular over recent years. People are now more focused on their health than ever and backyards are getting increasingly smaller. So, for many, a lap pool provides the perfect solution. Here’s everything you need to know about lap pools and whether they might be the right pool for you.


What is a lap pool?

Lap pools are designed with the intended purpose being health and fitness. As the name suggests, they are primarily used to swim laps in. They are catered best to serious swimmers that want an unimpeded length of water to swim in. Lap pools are perfect for those wanting to work towards fitness goals and improve their technique. They can also be used for other water sports and fitness activities. They are a great swimming pool option for those who have long and narrow yards or those who are limited on space but still want the luxury of a pool in their backyard.

What size can my lap pool be?

Lap pools are typically long, narrow and rectangular in shape and come in different sizes. They can range from around 8 to 12 metres long by around 3.5 metres wide. The width is generally the same as that of a swimming pool lane or two with enough space to cool off on a hot summer’s day. The depth of a lap pool is approximately 1.35 metres which is sufficient to walk in as well as swim laps at an athletic level.

How do you make a lap pool?

Fibreglass lap pools are manufactured in a factory on a mould. They constructed to be extremely storing and durable. Once you have chosen the lap pool you would like for your home and all necessary paperwork has been submitted and approved, your pool can be installed.

Can I customise my lap pool?

The shape of a fibreglass lap pool cannot be customised, however there are many ways you can tailor your lap pool to suit your swimming requirements. Some of these include:

• Spa jets – Spa jets are multipurpose and can be used to create resistance when swimming laps or used to relax after a hard training session.

• Lighting – Lighting is an effective way to enhance the entire look of your pool. Especially at night time.

• Heating – A heating system allows you to use your pool year-round and warm water in conjunction with spa jets is a fantastic way to relieve sore muscles and tension.

• Smart pool options – Smart technology for your lap pool allows you to control your pool cleaning schedule with one touch of a button from your smart device.

• Landscaping and surrounds – A lap pool can be a stunning focal point in your backyard, and you can enhance it even more so by choosing surrounds and landscaping to complement it.

• Gel coat finish – You can choose the colour of your fibreglass lap pool. Many reputable pool companies offer a vibrant colour selection.

How do you install a lap pool?

Installing a lap pool is much like installing a regular sized pool. In-ground pools are the most popular installation method and it involves excavating the ground and digging a hole where the pool will be situated. Next, your pool will arrive, it is then lifted into to place and levelled. Backfill is placed around the pool and it is compacted. Timber boxing is then constructed around the outside of pool for concrete to be poured. The concrete is smoothed and left to dry. Pavers or decking are then placed. Once this has been completed your pool is ready to be filled with water. Lap pools can be installed either above ground, partially above ground or inground. The installation technique varies depending on which type you choose.

How long does it take to install a lap pool?

Installing a fibreglass lap pool is relatively fast and simple. If you have easy access and your pool is to be built on a flat block, they can be installed in as little as 7 days. However, unforeseen factors such as weather, the time of year and lengthy council approvals can lengthen the time it takes to install your pool.

How much is a lap pool?

There are so many variables that can affect the cost of a lap pool. Added extras, landscaping, surrounds and the condition of your site all contribute to the overall cost. Many assume that because a lap pool is smaller in size than a large family sized pool that the price will be cheaper. This isn’t always the case. A lap pool is built to the same quality standards that a family pool is and it is installed using the same construction process. To get an accurate price, it’s best to contact your local pool builder. Many reputable companies offer free onsite quotes.

Benefits of a lap pool

There are many benefits to swimming laps and here are just a few:

Keep fit: Swimming laps is one of the best cardiovascular workouts you can do. Every muscle works to glide your body through the resistance of the water. Swimming laps tones and strengthens muscles and burns double the number of calories that walking does.

Swimming is for everyone: The great thing about swimming is that anyone can do it. It’s a great form of exercise for those with limited mobility or people who are recovering from an injury as it is non weight bearing and reduces the impact on bones and joints.

Improve mental health: Exercising and getting the blood pumping releases feel good endorphin hormones that can create a sense of euphoria. Swimming laps is a great way to destress and unwind which can be very beneficial for our mental health.

Sleep better: Swimming laps exerts energy and when combined with the soothing effects of water, it has been shown to have positive effects on ones sleep.

Why should I choose a lap pool?

If keeping fit and healthy is your main incentive for purchasing a pool, a lap pool may be the perfect solution. Lap pools are also a great choice for families that are limited on space who still want a pool to swim and cool down in. Whilst kids should never be in the pool unsupervised, the size of a lap pool is ideal for young children who are gaining confidence in the water as they don’t have far to swim from one side to another. Lap pools offer a private place at your own home to swim, exercise and relax. Another incentive for choosing a lap pool is that they are easier to maintain. As they are smaller in size, they use less water, require little effort to keep them clean and use fewer chemicals.

A lap pool is a sensible choice for singles or couples that want a pool for keeping fit, unwinding after a long day and don’t necessarily need a large pool.
Here at Barrier Reef Pools we specialise in transforming backyards and lifestyles with our luxury award winning fibreglass pools. We manufacture and install the highest quality pools on the market. If you have any questions regarding the suitability of a lap pool for your home, give our friendly team a call, and we will help in any way we can.

Mineral pools vs saltwater – What is the difference?

When choosing a sanitising system for your pool, it is a good idea to have a basic understanding of the different types to help you make your choice. Both salt and mineral water are gentler on the skin than traditional chlorine, however there are a few variances between the two. Throughout this article we will highlight everything you need to know about salt and mineral water systems.


Mineral pool system

Mineral swimming and bathing has been around since ancient times. Having a mineral water system or using minerals to treat your pool water can reduce chlorine use by up to 50%. It works via a process called electrolysis. Your pool chlorinator cell coverts the minerals into small doses of chlorine which is distributed through your pool water to keep it clean by eradicating bacteria and algae. The mineral compositions not only have a positive effect on the water quality but the body also. The main minerals found in swimming pool minerals include magnesium chloride, potassium chloride and sodium chloride and they can enhance the swimming experience by giving the water a “softer” feel. They offer many health benefits such as detoxifying the skin, alleviating sensitive skin symptoms, and relaxing the nervous system.

What is the cost?

A mineral water system is relatively inexpensive to purchase, starting at around $700. However, you do not need to replace your existing chlorine or salt chlorinator in order to use minerals for you pool. The water will need to undergo a full analysis and the filter may need to be changed prior to converting. Its best to contact your local pool specialist who can offer advice on how to complete this process correctly if you are unsure of how to do it.

Additionally, the ongoing expenses include replacing the mineral cartridge every 6 months or so which is around $100 to $150. A mineral system will require chlorine in addition to the minerals to keep the water clean so this cost will need to be factored in. Although, it will be cheaper than if you used chlorine alone. Minerals are around $30 for a 3 kg bag.

What are the benefits?

  • The water is softer – One of the biggest benefits is the quality of the water. Minerals are known to have a soothing effect on the skin. Those with a mineral water system say that the water has a silky feel and gentler on the body and eyes. This can prevent skin irritation and damage to clothes and hair.
  • Minimal wear and tear on your equipment – Your pool equipment and its components will not be damaged by strong chemicals that can wear down moving mechanisms and plastic parts over time.
  • Non corrosive – Mineral water is not corrosive to clothing, concrete and metal.
  • Highly compatible with all pool types – Mineral is a suitable sanitising agent for all types of pools as it has no ill effects on the interior surface.
  • Eco friendly – As the chlorine levels are so low, the water is much safer for the environment.

What are the negatives?

A downfall to owning a mineral system is that you still have to use chlorine in conjunction with mineral to sanitise the water adequately.

Why should I choose mineral?

Mineral is a popular choice for those wanting a sanitising solution that makes pool maintenance easy and is the gentlest on the skin. Mineral produces high quality water that is free of impurities and toxins. When it comes to best value for money, a mineral system is a front runner.

Salt water system

Saltwater systems are equally popular amongst pool owners. A saltwater system still uses chlorine to clean the pool. The saltwater chlorinator converts the dissolved salt into chlorine to sanitise your pool water as it is needed. In short, you are generating your own chlorine from salt instead of adding traditional chlorine straight to the pool water. However, the dose of chlorine is less than a traditional chlorine pool. A saltwater pool is easy to maintain and depending on which pool type you have, it will require very little cleaning from the pool owner.

What is the cost?

The initial cost of a saltwater system is typically more than other types such as chlorine, although, it can save you money in the long by not having to buy a big amount of chemicals. Typically, they start at around $800. Salt is relatively inexpensive to purchase at around $10 for a 25 kilo bag.

What are the benefits?

  • Gentler on the body – Salt water is also known to be gentler on the skin and eyes and the water typically feels softer too.
  • No harsh chemicals – The great thing about salt is it is non-toxic meaning you will not have to handle harsh chemicals to clean your pool. This is safer for the person cleaning the pool and people swimming in it.
  • Compatible with solar devices and equipment – Salt works well in conjunction with all solar pool systems.

What are the negatives?

When water quality issues arise with saltwater pools they can be more complex to rectify. If you overdose your pool frequently with high doses of salt, any plants or grass near your pool area will more than likely suffer as a result. The same applies if you have lighting or accessories with metal parts in your pool or furniture items that contain metal around the pool area, they can rust and corrode over time.

Why should I choose a saltwater system?

Saltwater systems are typically more to install initially, but you will quickly recoup your investment from the amount of money it will save you in the long run. They also require little maintenance, making it a convenient choice. Salt is cheaper to purchase in comparison to traditional chlorine and minerals. Additionally, salt is safe to use and store.

So, what is the difference?

Both salt and mineral systems are extremely similar. The difference is that saltwater pools work with a combination of salt and chlorine whereas mineral pools work with minerals and chlorine. The saltwater chlorinator converts the salt to liquid chlorine which reduces the need of having to use high doses of traditional chlorine in your pool. A mineral pool system works by using minerals that is converted via the same process into small doses of chlorine. Both salt and mineral work well to sanitise the water, they kill bacteria and prevent algae from harbouring and multiplying.

Whilst the water clarity of both systems is much alike, the water quality of a mineral pool is far superior. Mineral pools use less chlorine to sanitise the water than a saltwater system does. If you are thinking of converting your pool or you are buying a pool and deciding on a treatment choice, it’s a good idea to discuss the options available to you with your pool builder, they can offer helpful advice regarding which system is best for you.

Our team here at Barrier Reef Pools are experts in the pool industry and we have many years’ experience installing fibreglass pools with all types of sanitising options. Give us a call today if you require further information, we are more than happy to answer any questions you may have.

How Long Does It Take to Install a Fibreglass Pool?

If you are thinking of installing a swimming pool at your place, you might want to know how long it will take to install. The great thing about fibreglass pools is, they have a fast turnaround time and you could be swimming in your new pool in as little as 7 days! In most cases, a fibreglass pool build is relatively quick and simple, however there are occasions when unanticipated events do occur. This can affect the time it takes to put your pool in.


Here some things that can alter the installation of your fibreglass pool:

The time of the year

Understandably, most people want a pool when the warmer weather approaches and this is when pool companies get the majority of their enquiries and are generally inundated with requests for pool builds. If you want to make the most of your pool for an upcoming summer, its best to start the pool installation process as soon as possible. We recommend discussing your pool installation with a pool builder by June/July, even earlier is preferable. After summer is normally the best time to install a pool, the peak season is over and pool companies may offer added extras to fill their books for the winter season.

Many states here in Australia are notorious for being hot and dry in the summertime and inadvertently this is the time of year people tend to build, undertake big projects, and renovate. This results in high demand for pool installs and the books generally get filled up very quickly. This doesn’t mean you won’t be able to have a pool installed at this time, but it’s a good idea to get in early to avoid disappointment.

The weather

Demand for pools is less for the remaining months of the year which means no competing with other customers to get your pool put in, however, the weather may contribute to delays in putting your pool in. A substantial downpour of rain can stall your build, especially if it is continuous and the water doesn’t drain away swiftly.

Local council approval

It is a mandatory requirement that all pool builds are passed by local council authorities. The first step involves completing a planning process, a development application or permit permission, it will need to be submitted for approval. A majority of pool builders will take care of this for you or at least guide you through the process. The application will need to outline the construction process and safety standards that will be met.

The time it will take for your application to be approved varies for different regions. As mentioned previously, summer is peak season for the pool industry and approvals can take longer than normally expected. The earlier you submit your application, the better, to avoid any delays. Construction cannot begin until your local council has authorised the pool company to do so.

Other contractors involved in your pool build

When installing a pool, a pool builder is not the only person involved in the construction. Most times a pool project requires different contractors such as fencers, concreters, and electricians. Their availability can affect the time it takes to put your pool in. Most pool builders have a team of contractors that they work cohesively with on a regular basis to install pools.


Access to your property and the condition of the site

The quickest fibreglass pool installs are usually homes that are positioned on a flat block with good access to the site. This reduces the ground work time drastically. If you have limited access at your place, it might require more equipment and time to get in. If you have a sloping block or your yard is full of rock at may take longer to excavate the area than normal.

How is a fibreglass pool installed?

Fibreglass pools are premade in a factory and its just a matter of picking the one you want and getting it installed. Once your backyard has been inspected and measured, the ground will then be excavated to place the pool shell in. A level is used to measure where the pool is to be situated and how deep the hole needs to be.
The most important thing to get right is the base of the hole where the pool will lay. The pool shell needs to be placed on a solid foundation so it does not shift over time. The pool is lifted by a crane into place, some last adjustments are made to ensure it is in the exact position it needs to be, then backfill is placed around the pool and it is compacted. Next, timber boxing is built around the perimeter of the pool. Concrete is poured and smoothed out. A gap is left so that pavers or decking can be placed to sit flush with the edge of the pool. Lastly, the pool is filled with water and plumbing is completed. Once this is done, the pool is all ready to swim in.

How sturdy is a fibreglass pool?

Fibreglass pools are extremely durable and can last for more than 25 years. If your pool has been installed by a licenced pool builder, the likelihood of your pool shifting, even slightly, is extremely low. Reputable pool builders offer generous warranties on their pool builds. All Barrier Reef Pools fibreglass pools have a lifetime structural guarantee.

We hope this article has provided you with an insight to some of the factors that may contribute to the time it will take to install your fibreglass pool. If you have any further questions regarding how long your pool installation will be, speak to our skilled team at Barrier Reef Pools. We offer a personalised installation service to each of our customers and we are more than happy to help.

Can Fibreglass Pools Be Installed Above Ground?

Have you always wanted a swimming pool for your place but thought it was out of reach due to the exuberant cost and layout of your backyard? Well, the good news is, a pool could still be a probable option for your place. Above ground pools are generally cheaper to install and can be built to accommodate nearly any site and will tie in seamlessly with the existing layout of your yard. High quality fibreglass pools can be installed either inground, partially inground or above ground.

Having a fibreglass pool installed above ground doesn’t mean you have to compromise on the overall aesthetics of your pool, there are many ways you can customise your pool to suit your design ideas and your backyard. An infinity pool with disappearing edges is one of the many luxurious looking features that you can have with a fibreglass pool that is installed above ground.


Benefits of an above ground fibreglass pool


Above ground pools are far more cost effective than inground pools and they are quicker to install too. Installing an above ground pool avoids the added costs that traditional inground excavation and equipment brings. To meet Australian regulations for safety your pool must be installed on a flat surface, however, there is generally far less construction involved. The installation is quick which means no waiting around for your pool to be built, you can swim in it virtually straight away.


Some homeowners like the look of inground pools as they complement the overall look of their backyard. If an inground pool is not an option for the site you have to work with or you would rather an above ground pool, there are many ways you can customise the look of your pool to suit your home perfectly. With some clever finishes and landscaping, an above ground pool can be a stunning statement piece at your home.


For many, the cost of the pool can be the deciding factor on which type they go with. In comparison to inground, above ground pools can be thousands of dollars less. Installing a Barrier Reef Pools fibreglass pool above ground doesn’t mean that the quality of your pool is compromised, or it will look any less appealing than if you installed it in ground either. You are still getting the highest quality pool on the market that looks fantastic, just for a much lower price.


Fibreglass pool shells to be designed with superior tactile strength that is suited to be installed in any site, above ground included. Fibreglass pools are constructed to have a slight flex and accommodate earth movements so they won’t crack and will last just as long installed above ground as they do in ground.


Features of a Barrier Reef Pools above ground fibreglass pool

• All of our fibreglass pool range is available for above ground installation

• Manufactured to the highest and worldwide standard and can withstand all elements

• Available in 110 different shapes, sizes and designs

• Safety ledges and non-slip surfaces available

• They are compatible with both mineral and saltwater

• Extremely durable and come with a lifetime internal, structural and osmosis guarantee.

A Barrier Reef Pools fibreglass pool can be installed in almost any backyard

Advances in technology allows us to create the highest quality fibreglass pools that can be installed in virtually any yard. Our entire series can be installed above ground or partially inground. If you have a sloping block or a less than ideal site, ensure you use a licensed pool builder that has extensive knowledge and experience in installing pools on these types of sites. They will know the simplest and most cost-effective way to install your pool, saving you valuable dollars.

Different ways you can install a fibreglass pool

You have the option of installing your fibreglass pool in three different ways:


The first and most obvious way of installing a swimming pool is in the ground. In ground pools are a popular choice and are a great option for homeowners that have a flat site.

Partially in ground

In an ideal world everyone would have a nice flat area perfect for installing a pool, however, we understand this isn’t the case for many. We appreciate that all backyards are unique and a partially in ground pool might be better suited to some spaces. Our friendly team can offer helpful advice about the different options available to suit your site.

Above ground

Installing a Barrier Reef Pools fibreglass pool above ground eliminates the need for expensive excavation work and can be designed to tie in seamlessly with an existing deck or to be flush with your outdoor area.

We can create the pool of your dreams, no matter the site! We can help with:

1. Creating infinity edges, and window walls in your above ground pool

2. Installing your pool close to your house or building

3. A sloping block and require some or all of your pool to be above ground

4. Installing your fibreglass pool above or partially in ground

5. Building your pool to sit flush with existing decking or patio areas

Deciding which pool is best for you and your backyard

Whether you want your pool installed in ground, partially inground or fully above ground, our team here at Barrier Reef Pools are highly skilled and have many years’ experience building pools to accommodate a multitude of backyards. If you are considering transforming your backyard with a fibreglass pool, give us a call today, our skilled team are happy to answer any questions you have and discuss your options.

What Colours Can Fibreglass Pools Be?

You’ve chosen the design, size and layout of your pool, now it’s time to pick the colour. Fibreglass pools come in a variety of colours, so you have plenty of options when it comes to selecting the perfect one, the hardest part is deciding which one is going to suit you and your home the best.

What Colours Can A Pool Be

The look you want to create

If it’s a beach or oasis style that you would like for your place, one of our lighter pools such as our Sandstone Shimmer pools might be a good choice for you. The interior gel coat resembles the colour of sand and produces sparkling clear water once filled. If you want a stylish and sleek pool to compliment your ultra-modern backyard and home, a darker coloured pool can look lustrous and is a great choice for creating a contemporary pool design.

When you think of the overall look you want for your backyard, it’s a good idea to select a shade that will complement the existing colours of the exterior of your home and yard to make the overall space look aesthetically appealing. You want your pool to look like it’s meant to be there, not look incongruous and out of place.

If the majority of your backyard is a subtle tone, a vibrant coloured pool can create a stunning focal point, likewise a bright coloured pool can be just as well suited to a colourful backyard, picking the right tone can be the difference between a good looking pool and great looking pool. There are some clever ways to use colour to enhance the look of your pool and home, our experienced team can help with this.

Ultimately, it comes down to your personal preference, however, when choosing a colour for your pool, it’s a good idea to choose a shade that is going to be timeless for years to come rather than something that is in trend right now, it might look fantastic for the next couple years but quickly look outdated, which will make the overall appearance of your pool less appealing.

Choose a colour that will compliment your home

An impressive looking pool not only ties in cohesively with the home but has also the “wow factor”. A way you can produce this look is by choosing a lighter or darker finish for around the pool. For example, if you were to choose a dark toned pool, you could compliment it with lighter coloured timber decking or light pavers. This creates a point of interest and draws your attention to the pool. The same applies for a lighter coloured pool, but instead you would use darker pool surrounds such as granite or dark timber.

When deciding which pool colour to choose, think about how you want your backyard to look and feel when you walk outside. It’s a good idea to think of the look you want of your whole backyard not just the pool. Deciding on the design of your pool can help give you ideas on a colour scheme to suit, if you are unsure of colour you want, our highly skilled team can match you with a colour to suit your pool ideas.

Barrier Reef Pools use Advanced Colour Technology that is fade, weather and chemical resistant. All of our range comes with a lifetime internal surface guarantee!

Our Collection

Royal BLue

Royal Blue Shimmer

Royal Blue Shimmer provides a deep blue water colour. The surface is a deep royal blue base with light blue, medium blues and blacks speckled throughout.

Ocean Shimmer

Ocean Shimmer

Ocean Shimmer is a mix between Royal Blue Shimmer and Pacific Shimmer. It offers a deep, bright blue colour that sparkles in the sunlight. The gel coat surface is a rich navy colour, sprinkled with light blue flecks.

Pacific Shimmer

Pacific Shimmer

Pacific Shimmer is extremely popular. It has a stunning vibrant blue colour that glistens in the sunshine. It looks fantastic with sandstone or timber finishes.

Indigo shimmer

Indigo Shimmer

Indigo Shimmer provides a classic bright, light blue pool colour. The gel coat has a light blue base that’s speckled with silver and white flecks.

Sandstone Shimmer

Sandstone Shimmer

Indigo Shimmer provides a classic bright, light blue pool colour. The gel coat has a light blue base that’s speckled with silver and white flecks.

Alpine White Shimmer

Alpine White Shimmer

Alpine White Shimmer produces a light blue water colour. Fantastic for LED lighting. The gel coat is white.

Royal Jade

Royal Jade Shimmer

Royal Jade Shimmer offers a deep teal colour. Looks fantastic with dark grey finishes and greenery. Compliments modern pool designs. The surface is a deep teal, speckled with medium blues and greys hues.

Electric Grey Shimmer

Electric Grey Shimmer

Electric Grey Shimmer has a medium grey base with teal undertones. Once water is placed in it, it creates a sparkling rich aqua colour. It sparkles with silver and blue flakes.

Midnight Shimmer

Midnight Shimmer

Midnight Shimmer is our darkest blue colour. Perfect for small pools and spas. The base is black with light grey and white speckles. It transforms into a dark navy when water is put into the pool. Barrier Reef Pools have an expansive range of pools in a variety of colours and we are confident we can find the perfect colour combination to accommodate your personal preferences and to suit your home. Our team are highly skilled and can offer helpful advice regarding which pool colour is right for you. If you require further information about our colour range, give us a call, we are more than happy to answer any questions you have.

How Much Does a Fibreglass Pool Cost?

Installing a fibreglass pool is a big decision for many and generally one of the first things that people ask when considering a pool for their home, is how much will it cost? The initial set up cost is not the only thing homeowners should consider, but also the ongoing costs involved to maintain their pool and which option is going to be the most cost-effective long term.

How Much Does A Fibreglass Pool Cost

How much is it for an inground pool?

When it comes to purchasing a pool, there are a few options available on the market, this includes fibreglass, concrete and vinyl-liner pools. Understandably, there are many variables when it comes to the total cost of your new pool such as the shape, design and layout that you choose, as well as any extra add ons.

How much does a fibreglass pool cost?

On average, people typically spend $25,000 to $35,000 on installing a fibreglass pool. However, the price can vary and may be substantially less or greater than this depending on the size, shape and the site that the pool needs to be installed in.

Factors that contribute to the cost of your pool

Ultimately, it comes down to your personal preference and where the pool is to be situated at your home. Here are some variables that may alter the cost of your pool;

  • The shape, size and design you have chosen for your home
  • Any extras you may choose, such as lighting or water features
  • Whether your yard is sloping and the condition of the ground and soil
  • Easy access to your backyard
  • If you have chosen a self-cleaning pool
  • The quality of your fibreglass pool

When installing a fibreglass pool at your home, it is important to use a licensed pool builder to supply and install your pool. This ensures the pool is covered by warranty. Here at Barrier Reef Pools we offer a lifetime structural warranty on our fibreglass pools, opposed to a concrete pool which will generally give you a 7-year structural warranty at best. Barrier Reef Pools are the only pool company in Australia with the 5 Tick Certified Product Standard. It may be tempting to undertake a DIY fibreglass pool kit that some companies offer, however you should be aware of the risks and undisclosed costs that may be involved.
It goes without saying, if you’re going to make an investment to your home like a pool, it pays to purchase the best quality pool you can afford, not only to ensure longevity, but also to decrease the maintenance and costs that are involved with running it. It is also a smart idea to get any warranties that come with your pool, put in writing, that way you are covered if anything unforeseeable happens to your pool.

Placing A Fibreglass Pool

One of the many positives to installing a fibreglass pool, is how quick they are to install!

Another thing to consider when building a pool, is how long it is going to take to install. Put simply, the longer it takes to install, the more is going to cost. The great thing about a fibreglass pools, is how quick they are to put in. A fibreglass pool can take as little as a week to install whereas concrete pools can take upwards of 6 months.

How much is a vinyl-liner pool?

Vinyl-liner pools aren’t as popular in Australia as fibreglass and concrete pools, and this is because of the high upkeep that they require. They can be put in both above and in-ground, with an above ground vinyl-liner pool setting you back approximately $10,000. The cost of an in-ground vinyl-liner pool is similar to that of a fibreglass pool. Vinyl-liner pools require higher maintenance than other varieties of pools, making them less appealing.

How much is a concrete pool?

Concrete pools are usually priced similar to fibreglass pools, although it’s hard to give a specific price guide when concrete pools are not limited to shape or size. However, they are generally priced at the higher end. For decades concrete pools were the most common and sought-after pool, nowadays, fibreglass are a more popular choice, that is believed to be because of the quality and high standard that fibreglass pools are made to. The warranties on fibreglass pools generally surpass those of concrete pools, such as Barrier Reef Pools lifetime structural warranty.

What are the ongoing costs of having a pool?

The amount of money and time you spend on the upkeep of your pool depends heavily on the type of pool you install.

There are some factors that attribute to the cost of maintaining your pool;

  • The system you choose to clean your pool, whether that’s manually yourself or with one of our cleaners such as our self-cleaning systems• Whether you choose chlorine or saltwater for your pool and the cost of the salt or chemicals that you use to sanitise your pool
  • The type of pump and filter you choose to filter your pool water
  • Maintaining added features (if you have them) such as water features and heating systems
  • Maintaining the pools interior surface with aesthetic maintenance
Fibreglass Pool Showcase

What are some of the ongoing costs of a fibreglass pool?

If you’re looking for a pool that is the easy to maintain and costs the least to run, a fibreglass pool is the front runner. Once installed, it requires little effort to keep it looking fabulous all year round. Fibreglass pools are virtually non-porous and smooth, unlike their counterpart, a concrete pool, that is susceptible to algae and require more chemicals and more time filtering the water, which equals more money spent on electricity and chemicals.

What are some of the ongoing costs of a vinyl-liner pool?

A vinyl-liner pool requires much higher maintenance than a fibreglass pool. The vinyl lining in the pool, usually only lasts for 10 years, which means spending money relining it. Pools that are vinyl-lined are more likely to be damaged from sharp objects which can equal costly repair bills. A new vinyl-liner costs approximately $4000 to replace.

What are some of the ongoing costs of a concrete pool?

A concrete pool is far more porous than a fibreglass pool and tend to be more prone to algae and bacteria. This usually results in the owner spending more money on chemicals and maintenance to keep their pool clean. Another costly thing to consider when purchasing a concrete pool, is that some surfaces need resurfacing after approximately 15 years. This is a significant cost to the owner over the lifetime of the pool.

Some last things to consider when comparing pool prices

Ultimately, choosing the right pool comes down to the homeowner and their personal preference. if you do decide that you want to add a pool to your home, you want be sure that the one you choose is a sound investment and that you are going to attract buyers not deter them, if you choose to sell. Fibreglass pools really are the easiest pools to maintain and products such as our self-cleaning pool, make maintenance virtually handsfree. Unlike concrete and vinyl pools, our fibreglass pools come with a lifetime structural warranty.
It is sensible to choose a pool that’s not only going to be cost effective and easy for you to maintain, but also to appeal to prospective buyers if you do decide to sell your home in the future.
How much is your dream pool going to cost? Contact our friendly team today to organise your obligation free onsite quote!

How Long Do Fibreglass Pools Last?

Purchasing a swimming pool for your home is a big decision, so you want to be sure that the pool you have chosen, is not only going to be stress free to look after but also stand the test of time to be enjoyed for many years to come. A question that is frequently asked here at Barrier Reef Pools is, how long does an inground pool last?

How Long Do FIbreglass Pools Last

Different Pools Have Different Lifetimes

There is a couple of pool options on the market and their lifetime varies. Vinyl liner pools are generally the cheapest to set up initially, however they lack durability. They require higher maintenance than others as the vinyl lining generally only lasts for around 10 years before it needs replacing, the average cost of a vinyl liner replacement is around $4000. Another choice that’s available when considering a pool, is a concrete pool.

Concrete pools most certainly last longer than vinyl liner pools, although, many need resurfacing around 15 years later. The cost of resurfacing a concrete pool starts at a minimum of $10,000. They usually require more upkeep and chemicals to keep them clean. Concrete pools are porous which makes them susceptible to algae and bacteria, meaning more money is spent on electricity and chemicals. Concrete is also much cooler and requires more time and energy to heat. Fibreglass pools naturally insulate, and heat quicker compared to concrete pools, saving money on energy.

If you purchase a high-quality fibreglass pool, you can expect them to last for more than 30 years. Unlike vinyl and concrete, they don’t need replacing or resurfacing. With a Barrier Reef Pools fibreglass pool, you can expect them to last a lifetime, in fact, they all come with a lifetime internal, structural and osmosis guarantee!

Vinyl Ester Resin = Your Pool Lasting Longer!

Some of the benefits include.

  • Higher resistance from corrosion
  • Higher resistance to water penetration and damage
  • Higher resistance to heat
Fibreglass Pool Showcase 2

Our Fibreglass Pools Are Made With 7 Layers of Strength

  • Layer 1- UV and chemical resistant gel interior surface finish
  • Layer 2- Anti-corrosion barrier using the highest quality Vinyl Ester Resin
  • Layer 3- First structural and additional chemical resistant layer using glass fibre
  • Layer 4- Second structural layer, using high quality polyester resin and glass fibre
  • Layer 5- Reinforcement layer is an additional layer of high-quality polyester resin and glass fibre
  • Layer 6- Outer core laminate which consists of Klegecell/Divonycell sandwich core strengthening
  • Layer 7- Outer sealer coat is a high quality waxed polyester resin to protect the pool layers.

Fibreglass pools are designed not to crack, they have a slight flex, so they are able withstand earth movements and extreme temperatures. Concrete pools are notorious for shrinkage cracking, this may occur when they are very first placed in, if there is excess water in the concrete mix, or intense temperatures and wind.

Our fibreglass pools have outstanding strength and exceed the Australian Standards for thickness. We are the only fibreglass pool manufacturing company with the Australian Standards 5 tick certified product certification. Unlike concrete and vinyl-liner pool companies, that offer an average of 7 years warranty, we offer a lifetime structural warranty on all of our pools!

Just like a car, to keep it running at its best and to ensure longevity, it is important to maintain your pool with the products and equipment specifically designed for it. When comparing different pools, you want to make sure you are getting the best value for money over the lifespan of the pool and ultimately choosing one that is going to last the longest with the least amount of effort involved.

There are 3 major factors that determine how long your fibreglass pool will last:

How Your Fibreglass Pool Is Manufactured

Not all fibreglass pools are made the same. The quality of your fibreglass pool depends on the materials used and the workmanship of the manufacturing company. It’s a good idea to use a company that has a warranty included with their fibreglass pool shells. Barrier Reef Pools only use the highest quality materials in a state-of-the-art climate-controlled manufacturing plant. Our pool shells are produced under strict quality assurance measures and they not only exceed Australian, but worldwide standards for durability and strength. We have an 8-stage quality control process to ensure we manufacture the highest quality Fibreglass Swimming Pools in Australia.

How Your Fibreglass Pool Is Installed

It may be tempting to try to a DIY fibreglass pool installation yourself to save costs, however you should be aware of the major safety risks involved, with over 30 years of experience, we have seen things done the wrong way and the costly bill that comes along with it to fix. Ensure you use a licenced pool builder to install your pool to avoid problems such as bulging walls or your pool shifting. All Barrier Reef Pools are steel and concrete reinforced for superior strength. Backed by a Lifetime paving guarantee.

Landscaping 2
Landscaping 1

How Your Fibreglass Pool Is Maintained

As we know, pools are filled with water that contain a sanitising solution such as chlorine or salt. They are exposed to the elements and generally they are in direct sunlight for a majority of the day. If a pool is neglected, no matter what type, the surface may be compromised, and problems might arise. Making sure your pool is filtered and clean is one of the simplest ways to extend the lifetime of your pool. However, you do not want to overdose your pool with harsh, strong chemicals. This may decay the protective coating on some pools and reduce the lifespan substantially. Barrier Reef Pools Fibreglass pools are the easiest pools on the market to maintain, they can be looked after properly without a great deal of effort from the homeowner and will stay in tip top condition for many years to come. The surface of our fibreglass pools are virtually non porous, stain and chemical resistant, making them easier to control against bacteria and algae which means spending less money and time keeping them clean.

Overall, the manufacturer, the installer and the pool owner all contribute to the lifetime of the pool. Buying a high-quality fibreglass pool that is installed by a licensed builder and maintaining it correctly will all extend the longevity of your pool.

Can Fibreglass Pools Have Water Slides?

Most Aussie kids love swimming and playing in water, and a pool is a great source of entertainment when the warmer seasons hit. Why not ramp up the fun even more so by installing a water slide? You can have your very own water park in the backyard. A question we get asked often is “can fibreglass pools have waterslides?”. The short answer is, yes!


Here are some things to consider when purchasing a water slide for your fibreglass pool:

A slide that has its own water supply

If you want to emulate the experience you get from a real water park slide, you should choose one that has its own water supply. It works by taking water from your pool and creates a continuous stream of water from the top of the slide. A slide that has its own water supply, is not only more fun but safer too. You can adjust the water flow from a rapid stream to a slow trickle. This avoids the hassle of having to place a hose at the top that will just get in the way, trying to achieve the same effect. It also saves on water too as it uses water from your pool rather than the tap.

Selecting the colour, material, and features of your waterslide

The most popular colour choice of waterslides is blue and tan, however, deciding which colour is best, is up to you. When selecting the colour of your slide, you should choose something that is going to compliment the colour of your pool and coordinate with the exterior of your home. More importantly than colour, you should look at the safety features that the water slide has. All slides should have a non-slip ladder or steps, strong handrails, and be constructed with materials that are salt and rust resistant.

The most common water slides on the market are made from polyethylene or acrylic. They are a great choice due to their strength and longevity. The slide you purchase must be UV resistant otherwise it will fade very quickly from the sunlight, this will make it look old and unpleasant. Its is also a safety risk if the material cracks or breaks when someone is using it which can result in injuries. If your water slide is made of metal, be aware that it will get extremely hot when in the sun and could cause burns if water has not been continually flowing down it.

Types of waterslides suitable for fibreglass pools

Water slides that are designed for domestic use come in a vast variety of styles. You can have a slide that has a soft curve, a slide that is full of twists and turns, one that is completely straight that will get up optimum speed or a slide that does a complete 360 turn! The hard part is choosing which one. Once you have decided on the style of water slide you like, you can then choose if you want it to it turn right or left when entering the water. The good news is, all types of freestanding waterslides are suitable to be installed on a fibreglass pool

Some Benefits To Having A Slide


  • The first and most obvious one – It’s fun! A swimming pool on its own is great for entertaining the family and adding a waterslide can take it to a whole other level. Water slides are not only popular with the kids, but the adults too.


  • The water running off your waterslide creates a tranquil sound, even more so when it is not being used. Listening to running water is great for mediative purposes. Just sitting back listening to the water can boost your morale and mood.

Improved Overall Aesthetics

  • The right water slide can make the overall appearance of your backyard area more aesthetically appealing. A slide that is suited to the pool and outdoor space can enhance the entire look of the pool area.

Some last things to think of before installing a water slide at your place:

Who is going to use pool the most?

If children are going to use the pool the most, then you will probably get optimal use out of a waterslide. A water slide is a great way of keeping the kids busy and off technology in the warmer months. Great for burning off some energy too.

What size and style will suit your pool area best

Before purchasing a slide, it is a good idea to speak with a professional first. They can assess your pool area and offer advice on which style and design of waterslide will work best in the space you have to work with.

Where your slide should go

If you have the room, it is smart to place your slide in a position that is facing your entertainment area and house. That way you can keep an eye out if children are using it.

Check with council first

Before starting the process of buying a slide and getting it installed, you should check with the council to make sure you are not breaching any safety codes or regulations.

Barrier Reef Pools are all about creating stunning luxurious fibreglass pools and water slides are not something we install. We do, however, have extensive experience in the pool industry and can offer helpful advice regarding waterslides. Our friendly team can point you in the right direction. Give us a call today, we are more than happy to help.

Can Fibreglass Pools Be Heated


Can Fibreglass Pools have heating?

As the cooler months hit here in Australia, you might find the water is a bit too cold for swimming. A heating system allows you to enjoy your pool year-round, but can a fibreglass pool have heating? In short, yes! You have a few choices when it comes to heating, both come with their pros and cons. Heating isn’t just for pool owners who reside in cooler climates either, it’s a great idea for all outdoor pools, no matter where they are in Australia.

Here’s everything you need to know regarding pool heating systems to assist you in choosing the suitable one for your pool:

Why should I have a heating system for my pool?

Regardless of where you live in Australia, your pool will need some help to heat the water. Many people have the misconception that if you live in a hot climate, your pool will be warm enough to swim in throughout the year, however, this isn’t the case. In the warmest regions of the country, your pool might reach 30 degrees on the hottest summers day but drop by more than 10 degrees during winter. If you live in a cooler state such as Tasmania or Melbourne you can expect your pool water to be around 16 to 22 degrees in the middle of summer. Most people want to enjoy their pool year-round, not just for the warmest three or four months of the year.

Have you ever ‘felt’ the pool water to check if its warm enough to go for a swim? You jump in and it’s a lot cooler than you thought it was going to be? This is because the warmth from the sun only heats the top surface of the pool, below this is generally three degrees cooler.

Swimming laps or exercising in your pool during the cooler months might be more tolerable as you are constantly moving but if one of the main reasons you purchased a pool was to relax, you might find yourself not using it if the water is unbearably cold. The water needs to be heated for you to be able to relax, keeping in mind spas are around 36 degrees which is a comfortable temperature for most.

So, regardless of where you live and the climate of your region, you can greatly benefit from having a heating system for your pool to get the most use out of it, it’s just a matter of choosing the right heater for your fibreglass pool. The great thing about fibreglass pools is they retain the heat for far longer than concrete pools and are generally heat up quicker too!

What heating systems can I have in my fibreglass pool?

There are three different heating systems you can have for a fibreglass pool, these include:

Solar Heating

Solar power is the most popular and most cost-effective solution to pool heating. It uses energy from the sun to heat your pool. Solar is the most environmentally friendly option when it comes to heating it can also save you valuable dollars on your power bill compared to other heating counterparts.

How does solar pool heating work? Solar power heating is run via a solar pump, it uses a tiny amount of energy, only around 1 kW per hour. Cold water is pumped through a series of solar absorber capillary tubes on your hot roof, the water is heated and then returned to your pool. This method maintains a consistent temperature throughout your pool water. Solar power heating works best when there is a lot of sunshine on a warm day. A solar heater system can increase the temperature of your pool by 2 degrees which can make it a lot more comfortable to swim in. When there is a lot of rain, no sun or at night time, the solar heating system does not work as well.

Solar Pool Heating
Electric Heating

Electric heat pumps are a popular choice amongst homeowners, like solar, they are a relatively inexpensive method to heating your pool, the difference is, they reuse energy by collecting heat from the air and send it to your pool water through a heat exchanger.

An electric heating system can sometimes be more effective than a solar system, as it is not totally reliant on the sun for power, it is able to collect heat from the air during the night and when the weather is overcast. A positive to having an electric pump is they generally take less time to heat up your pool in comparison to solar heat pumps. A negative to consider is they usually require a larger amount of energy to run than solar heating. This makes them more costly and a less environmentally friendly option. Electric systems usually don’t heat the water up as much as a solar systems, however, it will work more effectively for more months of the year than solar.

Gas Heating

Gas is usually the most expensive way to heat your pool, although, it has its benefits too as it isn’t reliant on the heat from the sun or heat from the air to work. The great thing about gas heating is you can virtually heat your pool to a temperature that suits you anytime throughout the year.

Gas heating systems are commonly used for spas as they maintain a consistent temperature making it enjoyable to use no matter the season. The good thing about a gas system is they heat the water quickly, depending on the size of your system, you can heat your spa in less than hour so its great for when you want to use your pool quickly. Some negatives to having a gas system include the cost of running it can be expensive. As they are not very environmentally friendly, pool owners tend to have them as a back up option to use for when their solar systems aren’t getting enough energy from the sun to heat the pool.

What heating system is best for my pool?

Deciding which heating system is best for you comes down to your individual circumstances and preferences. Here are the 5 things you should consider when choosing a heating system for your pool:

  1. Do you want to use your pool throughout the year or if you are happy to just use it in the warmer months?
  2. Do you use your pool for relaxation, swimming/fitness or therapy reasons?
  3. The climate where you live
  4. How frequently you want to use your pool
  5. The amount of sun you get

Very young children and elderly people tend to be less tolerant to colder pool water than others and this is generally a result of them being less active and they are not likely to be swimming vigorous laps to keep warm. Heating is a great option if your pool is used for physiotherapy purposes. The warm water promotes ease of movement by reducing stress on joints and reducing pain.

Another thing to consider is the size of your pool, the bigger your pool is, the more efficient your heating system needs to be to maintain a consistent temperature.

If a heating system is something you want for your pool, it’s a good idea to talk with a licenced pool builder when planning your pool install. They can offer helpful advice regarding which heating system is suitable for you based on where you live and what requirements may need.

Some heating systems are required to be installed at the same time as the pool, speak with your pool builder regarding your heating before your pool is installed. However, if you already have an existing pool, a heating system can be still be put in.

A heating system gives you the opportunity to enjoy your pool all year round, not just in the hot summer months!

As mentioned, each pool heating system has their pros and cons, deciding which one is best for your pool is up to your personal preference and budget.

We hope this article has provided you with an insight into the different heating options available on the market, and you can make an informed decision when choosing a heating system for your pool. If you require any further information or have any questions regarding heating, please give our friendly team at Barrier Reef Pools a call today, we are happy to help.

Can Fibreglass Pools Be Salt Water?

A common question asked by homeowners looking to buy a pool is, can my fibreglass pool be saltwater? The short answer is, yes it sure can! Saltwater is a popular choice with pool owners as it avoids the “stinging eyes” and strong chlorine smell that chlorine pools are known for.

Some people think that having a saltwater pool means it will be “salty” like the sea, however this isn’t the case, a saltwater pool is about as salty as a teardrop!The difference between chlorine and salt water pools is that rather than using large doses of concentrated chlorine such as powders, tablets and liquid to keep your pool clean, salt is used instead, your salt chlorine generator system converts it into chlorine which is what ultimately kills bacteria and algae to keep your pool clean. Saltwater keeps your pool as crystal clear as chlorine without any of the unpleasant side effects. It is largely preferred by Aussies, with reportedly 80 % of all pools having a saltwater system.


Saltwater and Concrete Pools

Saltwater may slowly wear away at the cement finish on concrete pools, it is abrasive on the interior surface, particularly more so with plaster than with aggregate which seems to withstand salt slightly better.

Saltwater and Vinyl Liner Pools

Vinyl-liner pools that are enforced with steel walls can be at risk of damage from galvanic corrosion if the liner was to be compromised. They are also known to have metal parts which the salt will eat through and corrode.

Saltwater and Fibreglass Pools

The good news is salt has no adverse effects on fibreglass pools and they are highly compatible! Fibreglass pools are smooth and virtually non-porous. they do not attract bacteria and algae like concrete pools which means less money spent on cleaning and maintenance.

One thing to keep in mind when considering saltwater for your pool is the areas that are going to around your pool, such as concrete, a deck or equipment. They will go through times of being wet from people getting in and out of the pool and splashing etc and then dry again. This creates high concentrations of salt and residue which may corrode any objects that have metal or aluminium fittings. Each time you use your pool its recommended to wash it down with some fresh water to avoid this from happening.

Cost of Saltwater vs Chlorine

Comparing which is cheaper, saltwater or chlorine, overall, it’s not a huge saving either way, the chlorine costs more, around $150 a year whereas the salt will only set you back approximately $20 annually. It is important to know that salt chlorine generators generally only have a lifespan of around 7 years and cost $700 plus to replace.There are both positives and negatives to having saltwater in your pool. Listed below are some things you might want to consider when deciding which pool water is right for you and your family.

Positives to Saltwater

  • Most pool owners agree that saltwater “feels” softer than chlorine water. 
  • Saltwater is much gentler on the skin. Processed chlorine is known to be much harsher on the body, it can make hair brittle and even change the colour. Traditional chlorine can also cause allergic reactions in some swimmers. Salt that is designed for use in swimming pools is chemically very like the salt that resides in our bodies. Salt is easy to handle and store.
  • Saltwater pools are not hazardous if you accidently swallow the water, and it does not “burn” or sting your eyes if you open them under water. Saltwater also doesn’t have a smell like processed chlorine does.
  • Saltwater pools require less maintenance than traditional processed chlorine pools. The units automatically make chlorine every time the pool pump comes on
  • Saltwater pools are less expensive to operate overall.

Negatives to Saltwater

  • Saltwater may be corrosive to the surface of concrete pools. This includes finishes made of plaster, and natural stone. However, it does not damage the surface of fibreglass pools. It can leave residue on decking or edging of the pool and rust any aluminium or steel finishes that are in close proximately to the pool.
  • Saltwater needs extra attention to the pool water balance. To avoid mineral deposits from building up in the salt cell and to support adequate PH levels, we recommend to our pool owners to get their water tested regularly by a professional pool cleaner. 
  • If your saltwater pool system isn’t maintained and used correctly, it may damage your equipment, especially outdated systems that have brass or aluminium on them.
  • Saltwater pools require the pump to be running everyday for approximately 8 hours a day, sometimes more for larger pools. 
  • The initial outlay that a saltwater system can cost might be a negative for some homeowners. There are many different salt chlorine generators on the market to choose from.There are various factors to consider when choosing which type of sanitising option, you want for your pool, ultimately it comes down to the homeowner and which one they prefer. 

Saltwater Pools Are Preferred By Many

Chlorine pools are generally more maintenance and the chlorine is more costly to purchase than salt, however, saltwater pools require more money upfront than chlorine. Saltwater pools haven’t been around for as long as chlorine, with them only making their debut around the 1980’s and their short time, they have become increasingly popular and the preferred choice by many. A lot of people are choosing saltwater or converting their chlorine pool to salt as it is less expensive to keep clean and is less harsh on the skin. It is more of an initial cost upfront however, customers are saving more money over the long term. If you have any questions regarding saltwater for your pool, feel free to call our experienced Barrier Reef Pools team today.

How Do You Clean A Fibreglass Swimming Pool?

If you’ve purchased a fibreglass pool, one of the things you might want to know is how to clean it. That is of course if you decide to do it yourself rather than sourcing a pool cleaner to take care of it for you. The great thing about fibreglass pools is, they are very easy to maintain, much easier than other types of pools such as concrete and vinyl.


Here are some handy tips to keeping your pool in tip top shape all year round:

Clean debris from your pool regularly

Even if your pool is located in an isolated position in the backyard with no trees or plants surrounding it, it is a high possibility that you will still find leaves, insects and other debris floating around your pool. The chances of finding these in your pool if trees and plants are nearby, is even higher. A dirty pool is unpleasant to look at and not very healthy to swim in, to keep your pool clean, it’s essential to have a regular cleaning timetable.The good news is pool maintenance tools are relatively cheap to purchase. A pool leaf scoop has a long telescope handle which allows you to remove dirt and leaves from anywhere in your pool. Anything you cannot remove with a pool scoop, your vacuum will clean up.

Only use quality products that are designed for your pool

Products that are not designed for cleaning fibreglass pools can contain harsh chemicals which may damage your pool. The wrong type of cleaner will also disrupt the chemical balance of the water. Brushes with stiff bristles are not advised to use on your pool as this may scratch the surface of the fibreglass. It is best to use products suited to fibreglass pools for the best results and to maintain the quality of your pool for many years to come. 

Keep an eye out for stains

Stains are not only unappealing to look at, but they are in indication that there is an imbalance in your pool water. They are generally caused by high concentrations of metal. It is important to know which kind of metal is staining your pool before you try to treat it. Different types of metals leave different coloured stains. For instance, high levels of magnesium will result in grey stains, iron causes a maroon coloured stain and copper leaves a blue-green stain. Your pool is also susceptible to organic stains caused by things such as leaves, dirt and algae. These stains are generally green and brown in colour.To prevent stains in your fibreglass pool, it is important to remove debris and use a metal chelating agent. Our experienced team can provide further education on this.

Filter and water quality

Every pool, fibreglass included need a quality filter pump to maintain the water quality, so it is clean to swim in. A pool pump generally runs for 6-8 hours a day for saltwater and slightly longer for chlorine. By running the pump during the day, you will avoid any imbalances in your water, and it will stay nice and clean, ready to use at your leisure.An important factor to maintaining your pools water quality is the pH level. Ideally, the pH of your pool should be between 7.2 and 7.6. The alkaline levels should be around 80 to 120 parts per million (PPM) and the chlorine just under 3.0 PPM. It is a good idea to have these chemicals so you can add them when necessary to adjust the levels of your pool water.

Pool cover

The best way to prevent your pool water from getting tainted is by using pool cover. This will ensure that your pool is free from leaves and other debris. This reduces the need to manually remove leaves and dirt, therefore decreasing maintenance for when you are not using your pool.When installing a fibreglass pool, you will have the choice of using saltwater or traditional chlorine to sanitise your water. Saltwater being the more popular choice mainly due to it being gentler on the skin than chlorine. Both saltwater and chlorine have their pros and cons. You can find out more info regarding this in our “Can Fibreglass Pools Be Saltwater?” article.  Fibreglass pools are much easier to maintain than concrete or vinyl liner pools. Concrete pools are porous and are vulnerable to algae overgrowth, vinyl liner pools are better at keeping algae at bay, although, it is known to grow in the seams of the vinyl liner and also in the nooks and crannies of the plastic stairs where there is poor water circulation. The smooth gel coat of a fibreglass pool is nonporous and virtually algae resistant.

A little bit of maintenance goes a long way

Fibreglass pools require the least upkeep, however, they still do require some maintenance, even if it is a small amount. If you create a cleaning timetable and keep an eye on the chemical balance regularly, your pool should stay clean and healthy year-round. If maintaining your pool is not something you want to be responsible for, we recommend hiring a professional pool cleaner to maintain and service your pool. This will ensure optimal functionality and one less thing you have to worry about. If you have any questions in regards to keeping your fibreglass pool clean, our friendly team are happy to help. Give us a call today.

Does a Swimming Pool Add Value To Your Home?

Deciding if a swimming pool is a good investment for your home? This is generally one of the things that comes to mind for homeowners when considering a pool. Understandably, for many, installing a pool is a substantial investment to your property, so you want to be sure that you are making the right choice.


The lifestyle that a swimming pool provides, encapsulates the outdoor living lifestyle that Aussies are notorious for, right at your back doorstep ready to use at your leisure!

Having a pool in your backyard has become an iconic staple of many Australian homes and with our warm climate year-round, why not! It provides homeowners with a copious amount of benefits; it’s a complete lifestyle change for many people. The idea of having your own private recreational area to enjoy for many years to come, is extremely appealing to us Aussies. It provides a space that can be used for a multitude of purposes, whether it be lounging around and relaxing on those balmy summer days, or used for fitness and fun, which is not only greatly beneficial for our mental health but our overall general well being. A swimming pool is something that can be enjoyed for many generations to come, creating lifelong memories with family and friends along the way!

If done correctly, a swimming pool can add substantial value to your property too!

Research shows that houses with a swimming pool are priced higher than those that don’t. However, ensuring that you have a top-quality product such a fibreglass pool, that it aesthetically appealing, will increase your value property more so than an older style of pool such as concrete and vinyl liner pool, these are generally outdated and more upkeep for the owner.

Lendi, a home loan platform, conducted a survey consisting of 1000 Australians and asked if they would pay more for a house with a pool. 1 in 7 stated they would pay $50,000 or more. “This would approximately return the cost of the pool and installation,” Lendi said.

Some important factors to consider when purchasing a pool to ensure that you are adding optimal value to your home

Location, Location, Location

Installing a pool in the right suburb and climate is key to adding optimal value to your property. Homes based in suburban, family orientated neighbour hoods and homes located in states with warmer climates, tend to attract potential buyers that are willingly to pay more for a home with a pool. Surprisingly, seaside suburbs house the largest number of homes with pools, this is believed that people who are attracted to waterside living will pay more for a home with a pool. Additionally, property owners should factor in considerations regarding placement of the pool in their backyard to ensure it complements their home, such as sunshine, distance from the house, and of course aesthetics, ideally the pool design you choose should be timeless and look amazing not only today, but for decades to come. This will increase your odds adding valuable dollars to your home.

A pool that requires minimal effort

A big factor that can potentially turn buyers off, is an older, outdated model that requires costly work and daily upkeep of the pool. A smart idea to consider the various cleaning options that are available when selecting a pool to reduce the commitment involved with maintaining it. Modern technology allows us to produce state-of-the-art pools that are practically self-sufficient, with minimal obligation and effort from the owner.

A system such as our QuikClean Xtreme in-floor cleaning system means your pool cleans itself! It works by eliminating debris frequently, without the need of a vacuum or having to manually do it yourself. It distributes the chemicals evenly throughout the pool, ensuring that your water is circulated correctly. Homeowners have stated to us having this system in place, has made maintaining their pool stress-free and is an attractive feature which is appealing to buyers, making their home easier to sell.

Shape and design of the pool

Purchasing a pool based on the shape is a personal preference, we all have different likes and dislikes, however, if selling was something that you would consider in the near or distant future, its clever to purchase a pool that’s shape is timeless and isn’t just “in-trend” right now. Kidney shaped pools for example, were all the rage in the 90’s, and whilst kidney pools are still fantastic in their own right, they are not as popular now as they used to be. If you were wanting to add maximum value to your home with a pool, a rectangular shape is a smart choice as it boasts slick edges, clean lines and will remain modern for decades to come.

How energy efficient your pool is

The less you are out of pocket to run your pool the better, plus the more energy efficient your pool is, the more enticing it will be to potential buyers if you choose to sell in the future. Using an energy efficient pump is popular choice and can drastically reduce your running costs, this however may save you costs on your energy but may increase the amount you spend due to the substantial reduction in circulation quality. The most efficient solution to keeping your pool water clean, is a combination of energy efficient equipment with a circulation technique that will assure maximum mixing water and keep your pool crystal clear year-round. Our team can help with this!

“If there’s one thing homeowners are proud of, it’s their swimming pools!” -Swimart.

The Swimart Summer Pool Owners Survey 2012, conducted a survey of almost 200 pool owners from across the country and found that in terms of value, swimming pools can add an average of $30,000 to a property; with estimates ranging between $10,000 and $100,000, depending on the style, location and size. Aussies love our pools, and we can understand why.
Eighty-five per cent of Australian pool owners believe that their pool adds value to their homes, with 42 per cent admitting a pool is a deciding factor when purchasing property.

“According to our research, the value a pool adds to a property can be defined in both monetary and lifestyle terms,” says Chris Fitzmaurice, national manager, Swimart. “Almost half of those pool owners we surveyed use their pool most for relaxing and another third for quality family time.” Australia is a country that is known for its pristine beaches, however, 81% stated that they would rather relax by the pool than head to the beach.
Ray White Real Estate states, a pool could be a smart move in helping increase the value of your property.

“There is no doubt homes with pools are more attractive to purchasers”

Christine Rudolph who is ranked in the top 2% internationally as an Elite Performer for Ray White, who specialises in high-end inner-city homes says, “There is no doubt homes with pools are more attractive to purchasers. Recently I sold a magnificent property, but the days on market were far longer as the majority of buyers wanted a pool.”
In comparison, most premium homes where the pool is now a feature, integrated with the living, dining and kitchen area, are highly sought and sell quickly.”

Additionally, Christine Rudolph from Ray White explains “statistically a home with a pool sells for 20% – 30% more than one without. This potentially equates to a 100% return on investment for homeowners who add a pool.”

For example, a property in the inner Brisbane suburb of Tenerife with a small plunge pool, recently sold for $1.4 million, while a home in the same street, similar condition but without a pool, sold for just over one million. The pool definitely made a difference.

A fibreglass pool installation can be completed in as little as 7 days! It is a prompt way to add value to your home, it can be designed for the whole family to enjoy or installed prior to selling your property.
“For many of the premium properties we sell in the inner city, the home is actually designed around the pool as a feature. Stunning pools certainly captivate the attention of buyers who visit,” Ms Rudolph adds.’

“A good pool is likely to heighten the level of enquiry for a property, which should push the value up.”

Each year, 20,000 pools are built here in Australia, costing an average of $30,000; this amount is thought to be added to value of the property. As research analyst, Angus McLean from PRD Nationwide explains, “It’s hard to put a number on the value, but a good pool is likely to heighten the level of enquiry for a property, which should push the value up.”

Put simply, people like pools! If your property has one, it will generally accumulate more interest than other homes in the area. Increased interest in the property means more competition when it comes to bidding, and in hand reaches a wider market, giving you the better price as the seller.
Fibreglass pools are the way of the future, they are replacing old concrete and vinyl liner pools that were the only option many years ago. Generally, a fibreglass pool is seen as more aesthetically appealing and therefore adds more value to the property.

The latest data from Roy Morgan shows that swimming pool ownership has increased from 12 to 13 percent, which equates to approximately 2.7 million Australians living in a home with a swimming pool – up from 2.3 million in 2015.

So how does a fibreglass increase the value of your house?

Some advantages of a fibreglass swimming pool

  • They are recognised for their easy, low maintenance upkeep
  • They far surpass the lifetime of a concrete or vinyl pool
  • The porosity of a fibreglass pool. It is made of a tough gel coat, that is practically non-porous, this not only protects the fiberglass but also gives it a glossy and smooth finish
  • Property owners spend around 75% less money and time on maintenance, therefore increasing the likelihood of a higher investment return
  • Fast installation, the quicker your pool is installed the more money you can save
  • Luxurious, modern appearance. Fibreglass pools are aesthetically appealing, with finishing touches such as pool lights and water features, they are an asset to your home.

If you do decide to put a pool in at your home, it is best to consider the varying factors mentioned above and ensure that you are putting in the best quality product that is available, such as fibreglass pool. This will not only make cleaning and maintenance easier and cheaper, but it is more likely to appeal to prospective buyers if you do choose to sell in the future. The benefits of having your own pool are endless and it is a clever investment if you want to add value to your home.

You are never going to please every single buyer when it comes to selling your home, no matter how amazing it is, however, research shows that Aussies love their pools and the lifestyle that having one brings. Living an outdoor lifestyle is embedded in our culture, with most people spending their free time outdoors, enjoying their weekends. Many of which are spent catching up with friends, having a drink and barbeque, imagine topping it off with a dip in the pool – doesn’t get much better than that!

Concrete vs Fibreglass Pools: Which Is Better?

Australia has long been a nation of pool lovers, but today’s swimming pools are very different to those which were around twenty years ago. Trends change and new technology has arrived improving the structure and longevity of a pool.

Once you’ve made that decision to dive in and buy one, take some time to mull over what type is best for you. The two leading pools are concrete and fibreglass. To help you to make your choice, we’ve come up with some pros and cons of each, so you can be reassured you’re making the right selection.


How long does it take to install a pool?

Do you buy things on the spur of a moment and want to make use of them as soon as possible? If that’s you, then a concrete pool is no good because it requires patience. Concrete pools take longer to install. A concrete inground pool can take as long as three months because it needs to be built from scratch.

Excavators will have to dig the pool hole, and once the concrete is in it will need to be sprayed and left to cure. Then comes some arduous, hard graft work such as tiling, coping, paving, fencing and other finishing details. You’ll be surprised that a perfect concrete swimming pool can take several months from start to finish.

If you opt for fibreglass, then you’re effectively buying something off the shelf, which will be manufactured off site and lifted into place. Soil will need to be excavated but once the pool is installed, fill it with water and then backfill the structure. Once that’s done, it’s just a case of fitting your pump and electrics, including any lighting features or filtration, and concreting the surrounding area of your pool. Believe it or not, that can be achieved within a week, so a pretty swift turnaround compared to a concrete pool.

Which is more affordable to install?

Fibreglass pools win hands down when it comes to cost. Installation is less labour intensive because they are prefabricated.

Concrete pools are up to 30% more expensive because they are built from scratch for an individual customer, but they are very strong and sturdy. They’re not compatible to all soil types. Be warned, if the soil isn’t compacted enough or is unstable, the pool itself may start to sink on one side.

Although Australia benefits from an all-year-round warm climate, don’t forget the summer storms! Any rain or wind may delay your concrete pool installation. Think of the further costs associated with waterlogged soil.

Which is more expensive to maintain?

Ongoing maintenance costs are cheaper with a fibreglass pool, the hi-tech gelcoat technology means it’s smooth and non-porous so there’s less opportunity for mould and algae to grow. Buying a fibreglass pool is an eco-friendly choice because you’ll have minimal cleaning and you’ll need less chemicals, which in turn will reduce energy consumption and your bills.

A concrete pool requires more chemicals and brushing, especially over the summer months as algae is drawn to the concrete walls and floor. Every seven to twelve years it will require an expensive resurface or acid wash where strong acids are used to strip the outer layer of the pool. It can be a messy and time-consuming process.

What about functionality?

Many people prefer swimming in a fibreglass pool because the gelcoat finish is smooth to touch, with less chance to hurt yourself on any sharp edges which you may find in concrete pools. The water is often warmer because fibreglass pools retain heat better.

Fibreglass pools can come with inbuilt spa, tanning ledges and steps, so with plenty of added extras. Because they are mass produced, the downside is that you’ll never own that one-off unique designed pool, whereas a concrete pool can be constructed to suit your personal requirements.

With a concrete pool there is more scope for variety with different colours and interior textures. It can be painted or tiled but with fibreglass pools you’re limited on colour options.

In Summary

Pros Of Fibreglass Pools

  • Quick to install
  • Easier to maintain over a long period
  • Can come with in-built spas, tanning ledges
  • Look modern
  • Retain warmth better
  • Smooth gel surface means you can’t scratch or hurt yourself while swimming

Cons Of Fibreglass Pools

  • Come in standard sizes so they’re not unique

Pros Of Concrete Pools

  • Sturdy and solid so can last a long time
  • Can be individually made for your requirements
  • A range of finishes available

Cons Of Concrete Pools

  • Long turnaround time to install
  • More expensive
  • Not suited to all soil types
  • Not as economical to run and requires more maintenance
  • Concrete surface more easily attracts bacteria and mould
  • Surface finishes are rough

It looks as though fibreglass pools have the edge, but it’s your choice and you need be comfortable with any decision you make. If you need further advice, speak to the team of experts at Barrier Reef Pools. We have won multiple SPASA awards year after year, which acknowledges that ours are some of the best pools and spas in Australia. All our pools are made in a state-of-the art facility. We’re the only fibreglass manufacturers nationally to achieve the prestigious Australian Standards 5 tick logo and certified product certification, which means you can be reassured you’re buying the best. Why not visit one of our display centres to find out more?